SpaChoice 472-3-5081 Sanitizing Granules Hot Tub Chlorine 5-Pounds, 1-Pack
Description
Spa Choice Sanitizing Granules are designed to dissolve quickly and
completely. Chlorine granules provide a steady source of available chlorine to
spa water to control algae growth, kill bacteria and destroy organic
contaminants. Spa choice chlorine granules are stabilized to protect against
ultraviolet radiation from the sun, increasing the life of your chlorine. This
product is designed to dissolve quickly and completely providing a steady
source of available chlorine to control the growth of algae, kill bacteria and
destroy organic contaminants. DIRECTIONS FOR APPLICATION: Broadcast the
product evenly over a wide area in the deepest part of the spa with water
circulating. DIRECTIONS FOR SPA AND HOT TUB USE: Each level teaspoon (0.17
ounces) of this product will provide approximately 1.4 ppm available chlorine
in 500 gallons of water. Using an appropriate test kit, test and adjust the
water to the following values: pH 7.2-7.8, total alkalinity 60-100 ppm,
calcium hardness 200 ppm minimum. Maintain these conditions for proper spa and
hot tub operation by frequent testing with a test kit. Do not allow cyanuric
acid level to exceed 150 ppm. It is recommended that spas and hot tubs be
drained every 30-90 days. More often under heavy use. Consult manufacturer’s
recommendations concerning the compatibility of chlorine sanitizers with their
equipment. Some oils, lotions, fragrances and cleaners may cause foaming or
cloudy water and may react with chlorine sanitizers to reduce their efficacy.
DIRECTIONS FOR START-UP (FRESHLY FILLED) 1. Turn on the circulation system and
ensure that it is operating properly. 2. Add 6 teaspoons of this product for
each 500 gallons of water. Check the free available chlorine (FAC) and, if
below 4-5 ppm, repeat as needed. Re-entry into treated spas is prohibited
above levels of 3 ppm of chlorine. DIRECTIONS FOR REGULAR USE: Turn on the
circulation system and ensure that it is operating properly. Scatter
approximately 3 teaspoons per 500 gallons of this product over the surface of
water. Always use a clean dry spoon. Test for FAC and add additional product,
if necessary, to attain 4-5 ppm FAC. Maintain 1-3 ppm FAC while the spa or hot
tub is in use. After each use, shock treat with 9 teaspoons per 500 gallons
water to control odors and algae. Repeat as needed. Re-entry into treated spas
is prohibited above levels of 3 ppm of chlorine.
Features:
- Dissolves Quickly and Completely
- Stabilized Spa Chlorine
- 56% Available Chlorine
- Controls Algae
- Kills Bacteria
- Downloadable User Guide Available Under Product Information: Technical Specifications
Product Details:
- Brand: SpaChoice
- Item Weight: 5 Pounds
- Item Form: Granular
- Product Benefits: Chlorine Sanitizer, Controls Algae, Kills Bacteria, Destroys Contaminants
- Product Dimensions: 6 x 6 x 10 inches
- Item Weight: 5 pounds
- Manufacturer: Spa Choice
- Country of Origin: USA
- Item model number: 472-3-5081
- Is Discontinued By Manufacturer: No