Milwaukee 2471-20 M12 Cordless Lithium Ion 500 RPM Copper Pipe and Tubing Cutter Adjustable from 3/8" to 1†Diameters (Battery Not Included, Power Tool Only)

Description

If you’re working with pipes, you’ll need to cut them at
some point. Whether you’re a plumber, HVAC specialist, boiler worker, or other
industrial worker, you’ll benefit from Milwaukee’s 12 Volt lithium ion copper
pipe cutter. Rather than hack through your tubing with a handsaw or other
crank-operated hand tool, simply pull the trigger on this powerful device and
you’ll be able to rip through 3/8″ to 1” piping with ease. Don’t worry about
adjustments, because the 2471-20 will do it for you. Simply hold it over the
pipe, press the trigger, and hold on until the unwanted end of your pipe falls
away. Its motor runs at up to 500 RPM, so you know you’ll be able to tear
through it with ease. Damp environments won’t weaken the strength of this
tool, either. Its insulated design keeps water out of the motor and other
moving parts, letting you focus completely on the task at hand without fear of
unnecessary wear. While it works best with the 12V Red Lithium line of
batteries, this cutter will function with the other 12 Volt lithium ion or
NiCad batteries offered from Milwaukee (batteries not included). For
industrial applications where time and quality are of the essence, look no
further than the Milwaukee 2471-20 to fulfill your needs with ease. From the
Manufacturer Milwaukee Electric Tool Corporation introduces the industry’s
first M12 Copper Tubing Cutter, specifically designed for cutting copper with
the speed and versatility that plumbers, mechanical contractors and remodelers
require. With a 12-Volt LITHIUM-ION battery and ultra efficient gearing, the
2471-22 performs over 200 cuts on a single charge. A close-Quarter rotating
head cuts installed copper tubing with as little as 1-1/2-Inch of clearance.
At 500 RPM, the patent pending cutting mechanism cuts copper tubing up to 10X
faster than conventional cutters and automatically adjusts diameter to cut
through 3/8″ – 1″ copper tubing (1/2-Inch – 1 1/8″ OD, Type K, L and M). The
inline design offers greater reach and reduced wrist strain in confined
spaces. The metal cutting head is corrosion and rust resistant and is sealed
for protection from water. Electronic overload protection and uni-body
construction provide exceptional durability. Additional features include a
battery fuel gauge, which displays the remaining run-time and a built-in LED
work light which illuminates the work surface. Backed by Milwaukee’s 5-Year
tool warranty.

Features:

• AUTOMATIC ADJUSTMENT: Wrap this around type K, L, and M copper pipes and it will adjust from between 3/8" and 1 automatically
• WATER RESISTANT: The head of the unit is sealed tightly to prevent water from leaking in and damaging the motor. Ideal for plumbing applications
• HIGH POWERED MOTOR works at up to 500 RPM, letting you work up to 10 times faster than standard hand-operated pipe cutters or saws
• LOW CLEARANCE: You can use this with piping that is as little as 1 1/2 away from a wall without risk of damage to the tool or pipe
• RED LITHIUM COMPATIBLE: This tool will function with the batteries in the Milwaukee M12 lineup. These include the 48-59-1201, 48-11-1970, 48-11-2401, 48-11-2430, 48-11-2460, 48-11-2420, 48-11-2402, and 48-11-2440

Product Details:

• Manufacturer: ‎Milwaukee
• Part Number: ‎2471-20
• Item Weight: ‎1 pounds
• Item model number: ‎2471-20
• Batteries: ‎Lithium Ion batteries required.
• Is Discontinued By Manufacturer: ‎No
• Material: ‎high-carbon steel
• Thickness: ‎1 Inches
• Power Source: ‎Cordless
• Voltage: ‎12 Volts
• Item Package Quantity: ‎1
• Included Components: ‎Unit^Instruction Guide
• Batteries Included?: ‎No
• Batteries Required?: ‎No
• Warranty Description: ‎5 Years
• Date First Available: September 5, 2008