Product Details

Color: Black, 52114, P3 Velour Matte
Size: Thickness – .118″, Size – 12″ x 24″
Brand: Small Parts

• Part Number: 800019
• Item Weight: 2 pounds
• Product Dimensions: 23.4 x 11.5 x 0.3 inches
• Item model number: 800019
• Size: Thickness – .118″, Size – 12″ x 24″
• Color: Black, 52114, P3 Velour Matte
• Material: PVC Alloy
• Shape: Sheet
• Item Package Quantity: 1
• Number Of Pieces: 1
• Measurement System: Inch
• Shipping Weight: 2 pounds
• Domestic Shipping: Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
• International Shipping: This item is not eligible for international shipping.
• Date First Available: June 1, 2010

• Kydex V is a recycled grade of Kydex 100 and Kydex T
• Higher breakage resistance than competitive thermoplastics as measured by the Notched Izod test
• Among the most rigid of thermoforming materials with a modulus of elasticity of 2,482 MPa (360,000 psi)
• Easy to form with excellent part definition and deep-draw characteristics
• Great for knife sheaths and gun holsters

Size: Thickness – .118″, Size – 12″ x 24″ | Color: Black, 52114, P3Velour Matte KYDEX V KYDEX V sheet has excellent forming properties, which results in uniform wallthicknesses and crisp detail. KYDEX V sheet forms to deep draws with lowforces when heated to the upper end of the forming temperature range. Unlikemany other thermoforming sheets, KYDEX V sheet has unusually high resistanceto hot tearing. Forming Guidelines – Oven temperatures should be set differently than the settings used for ABS or FR-ABS. – Typical heater settings (percentage timers) are 30% – 50% top heaters and 50% – 70% bottom heaters. – The most frequent problem is trying to heat the sheet too quickly, particularly on the primary surface. – Cycle times will vary depending on the oven conditions and grade of KYDEX V sheet being formed. – When forming KYDEX V sheet, it is better to rely on the sheet appearance during heating than on fixed cycle times. – Forming temperatures – Guidelines: (Sheet should not exceed 204C (400F). 165 – 177C (330 – 350F) for < 1.50mm (0.060"). 182 - 196C (360 - 385F) for 1.50mm to 3.20mm (0.060" to 0.125"). 196 - 204C (385 - 400F) for > 3.20mm (0.125″) – Ideally the core sheet temperature should be within 10F of the surface temperature. Sheet Appearance During Heating As KYDEX V sheet is heated, the inherent stresses in the sheet will relax. Stage I: The heating is marked by wide undulations and softening. Stage II: The material will start to form small ripples (known as oilcanning). . Stage III: The material will start to smooth out and sag (KYDEX V sheetwill generally sag less than other thermoplastics due to its high meltstrength. . Stage IV: The ripples will have smoothed out indicating that most stresseshave been removed. 10 to 30 seconds afterwards the sheet is ready to form.