Lubegard 95020 Kool-It Radiator Flush, 16 oz.
Description
Kool-It Radiator Flush is formulated with additives that circulate through the
cooling system to remove scale, loosen rust, mineral deposits and combustion
by-products from the coolant system and radiator of a car or truck. Radiators
use coolants primarily containing anti-freeze & water. Water contains minerals
that form deposits over time on the metal surfaces of your cooling system and
radiator. These deposits will reduce the heat transfer rate (which can cause
overheating), the deposits also can cause corrosion of the coolant system
components and reduce the efficiency and life of the anti-freeze. The longer
you drive your vehicle without flushing the radiator and replacing the
coolant, the more likely that cooling system problems will arise. Extreme
driving conditions, such as; operation in hot climates, extended service
intervals, stop and go driving, operation in mountainous areas, speeds above
65 mph, towing, etc., increases the chances of harmful deposit formation in
the cooling system. DIRECTIONS FOR USE: When used with a flush machine –
Follow the manufacturers’ instructions. Without a flush machine – CAUTION:
Never remove radiator cap if engine is still hot. With engine cool, open
radiator drain petcock valve and drain the fluid from the system into a proper
container. Close radiator drain petcock valve. Add KOOL-IT Radiator Flush to
cooling system and fill with water. Replace radiator cap. Start engine, turn
heat on high, and run for 10 minutes. Stop the engine and allow to cool.
Remove radiator cap. Open radiator drain petcock valve. Drain water as before.
Refill with water and replace radiator cap. Run the engine for 5 minutes,
allow engine to cool. Open radiator drain petcock valve. Drain water as
before. Refill with water. Replace radiator cap. Start and run engine for 5
minutes. Stop engine. Allow engine to cool. Remove radiator cap. Open radiator
drain petcock valve. Drain water as before. Fill radiator with recommended
anti-freeze and water mixture. Replace radiator cap. For best results, always
add KOOL-IT Supreme Coolant Treatment (96001) after flushing the system.
Features:
- Quickly and safely removes scum, oily residue, sediments, rust, deposits and other degradation products from the cooling system of any car or truck
- Safe for all cooling systems including aluminum radiators
- Contains no acids
- Safe and easy to use
- Requires no neutralizers
Product Details:
- Manufacturer: Lubegard
- Brand: Lubegard
- Item Weight: 0.01 ounces
- Product Dimensions: 8.3 x 3.4 x 2.2 inches
- Country of Origin: USA
- Item model number: 95020
- Manufacturer Part Number: 95020
- Domestic Shipping: Item can be shipped within U.S.
- International Shipping: This item is not eligible for international shipping. Learn More
- Date First Available: July 7, 2004