KYDEX V – Black 12" x 12" x 0.125" pack of 1 sheet
Description
KYDEX V KYDEX V sheet has excellent forming properties, which results in
uniform wall thicknesses and crisp detail. KYDEX V sheet forms to deep draws
with low forces when heated to the upper end of the forming temperature range.
Unlike many other thermoforming sheets, KYDEX V sheet has unusually high
resistance to hot tearing. Forming Guidelines – Oven temperatures should be
set differently than the settings used for ABS or FR-ABS. – Typical heater
settings (percentage timers) are 30% – 50% top heaters and 50% – 70% bottom
heaters. – The most frequent problem is trying to heat the sheet too quickly,
particularly on the primary surface. – Cycle times will vary depending on the
oven conditions and grade of KYDEX V sheet being formed. – When forming KYDEX
V sheet, it is better to rely on the sheet appearance during heating than on
fixed cycle times. – Forming temperatures – Guidelines: (Sheet should not
exceed 204°C (400°F). 165 – 177°C (330 – 350°F) for 3.20mm (0.125″) – Ideally the core sheet temperature should be
within 10°F of the surface temperature. Sheet Appearance During Heating As
KYDEX V sheet is heated, the inherent stresses in the sheet will relax. Stage
I: The heating is marked by wide undulations and softening. Stage II: The
material will start to form small ripples (known as oil canning). . Stage III:
The material will start to smooth out and sag (KYDEX V sheet will generally
sag less than other thermoplastics due to its high melt strength. . Stage IV:
The ripples will have smoothed out indicating that most stresses have been
removed. 10 to 30 seconds afterwards the sheet is ready to form.
Features:
Product Details:
- Material: KYDEX
- Brand: Kydex T
- Item Dimensions LxWxH: 12 x 12 x 1 inches
- Color: Black
- Shape: Square
- Is Discontinued By Manufacturer : No
- Product Dimensions : 12 x 12 x 1 inches; 12.8 Ounces
- Date First Available : February 17, 2014
- Manufacturer : SIBE AUTOMATION
- Best Sellers Rank: #118,853 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #708 in Plastic Sheets
- #708 in Plastic Sheets
- Customer Reviews: 4.4 4.4 out of 5 stars 87 ratings
| Dimensions | 12.0 × 12.0 × 0.25 in |
|---|---|
| Ean | 0609408699016 |
| Mpn | K |
| Upc | 609408699016 |
| Brand | SIBE AUTOMATION |
- Canada shipment can take up to 10 days
- Alaska, Hawaii, and Puerto Rico shipment can take up to 10 days, and some items may not be permitted to ship to these locations.
- If any shipment is not permitted to your area, full refund will be issued within two business days.
- Refund given as money back (no exchanges)
- Return Shipping to be paid by buyer, unless item defective or damaged.
- 15% Restocking fee applies unless return due to defective or damaged product.
- Perishable or Hazardous Goods are not returnable. Returns may require compliance with Manufacturer policies.
Related products
