2pk-8"-32t – Brush & Brambles Specialty – RENEGADE BLADE® – Carbide Brush Cutter Weed Eater Blades, 203mm Diameter

Description

(1)—UNIVERSAL FIT — each of our blades will fit either 25.4mm Arbor (same
as 1”) or a 20mm Arbor with included “reducer washer” with YOUR “Blade
Hardware”. (2)— IMPORTANT |BLADE HARDWARE: A Blade will {not} fit onto the
Trimmer Axel Shaft by itself like the String Line Dispenser Spool will, so you
must acquire “Blade Hardware” (mounting adapter kit or parts) that consists
typically of two small discs; one has a raised circle on it that the blade
hole (arbor) fits onto, the 2nd small disc is the cap disc, then screw on the
Nut and apply a Cotter Pin. Sorry, we DO NOT supply blade hardware. (3)—
CARBIDE MIX in our teeth is proprietary and 2nd to none. Just Tungsten is not
enough; additives like: Hafnium, Tantalum, Titanium, Molybdenum, Silicone,
Zirconium, Boron, Niobium, Chromium, & Vanadium, make for a better Carbide Mix
for longer lasting teeth. (4)— ULTRA HIGH RPM: Our blade is built for any
RPM even super high RPM Trimmers (10,000+ rpm). Manufactured with a more
flexible steel as compared to the much more brittle steel found with table saw
blades (table saw blades can shatter if they hit an obstacle, plus they are
only built for approx. 3,450 rpm so they should never be used with gasoline
powered Garden Trimmers. (5)— RENEGADE BLADE is the ONLY Carbide Brush Blade
BRAND on AMAZON that has a {REPORT} from the foremost Testing Laboratory: UL,
LLC. (6)— CHOOSING THE CORRECT BLADE: Blades line up on a polarity scale
with maximum TEETH on one end [for CUT] all the way to maximum CAVITIES [for
GRAB] on the other end. EXAMPLE: Wood tree limbs require more teeth and no
cavities, and wispy flexible brush or grass requires maximum grab as teeth
alone just pushes grass over without cutting. THEREFORE: You must pick a
{Teeth & Cavity Pattern} that best suits your material being cut. We offer
blades to handle any: Wood, Bushes, Brambles, Hedging, Brush & Grass.

Features:

• Pack of {2} — 8"-32 teeth — Brush & Brambles Specialty – Carbide Tipped Trimmer Brush cutter Blades by RENEGADE BLADES
• BLADE ATTACHMENT PARTS: Our blades are "Universal Fit" provided you FIRST acquire "Blade Kit" parts for your Trimmer model, (we don't sell these parts). IMPORTANT>> A blade does {NOT} fit directly on the tiny 5/16" axle that the "String Spool" screws onto, ALL string trimmers require some type of blade mounting parts (normally 2 small discs, nut, and cotter pin) to run a blade (YouTube can show this). We offer TWO arbor sizes: 25.4mm (same as 1") & also 20.0mm with reducer washer.
• CARBIDE — is estimated to last 10x longer than plain steel but does not cost 10x more creating incredible value. The CARBIDE MIX in our teeth is proprietary and 2nd to none.
• SIX BLADE TYPES — All 6 specialty types of blades we offer are as follows: (1) RSB. thick tree limbs thick brush: 8-80t, 9-100t, 10-120t… (2) Yellow TALON Hybrid, thick tree limbs & hard brush: 8-72t, 9-84t, 10-96t… (3) Red RAZOR Hybrid, medium limbs & thick bushes: 8-56t, 9-68t, 10-80t… (4) Green VIPER Hybrid, small limbs – brush & brambles: 8-44t, 9-48t, 10-52t… (5) RSB, brush & brambles: 8-32t, 9-36t, 10-40t… (6) Blue HAWK Hybrid, brush only: 8-20t, 9-20t,10-20t

Product Details:

• Material: Carbide
• Brand: Renegade Blade
• Number of Teeth: 32
• Style: Compact
• Compatible Material: Wood
• Number of Pieces: 2
• Item Weight: 0.16 ounces
• Manufacturer: carbidebrushcutterblades.com
• Item model number: 2pack-8inch-32t
• Is Discontinued By Manufacturer: No