Prime-Line KC10HD Safety Spring Door Closer – Easy to Install to Convert Hinged Doors to Self-Closing – Diecast Construction, 4-1/4 In. White, Non-Handed (Single Pack)

Description

Convert your hinged door into a self-closing one with the
Prime-Line KC10HD Safety Spring Door Closer. Installation is a breeze thanks
to the closer and plastic slide plate being surface mounted. Use this spring
door closer on doors and it can close up to 150 pounds of force. It can also
be used on both left and right-handed doors. The door closers feature an
adjustable closing force and speed. Constructed of diecast materials with a
white painted finish, this safety spring door closer can complement any style
door. They are U.L. listed with a 1/2 hour fire rating and have a 1 inch wide
base, 4-1/4 inch hole center spacing and 4-3/4 inch arm. These closers operate
in a pushing-closed manner, rather than in a pulling-closed method, and they
do not have a hold open feature. The closer arm of this safety spring closer
has the ability to swing a full 180 degrees, but once it is mounted in place,
the door’s distance of swing will be reduced to the point of where it makes
contact with the bullet-shaped housing of the closer. All fasteners and
installation instructions are included with this item. Be sure to view the
manufacturer’s How-To Installation Video also linked to this page. From the
Manufacturer These safety spring-activated door closers are constructed of
diecast materials and come in a white painted finish. They are U.L. listed
with a 1/2 hour fire rating, and can be used to close doors weighing up to 150
lbs. These closers feature an adjustable closing speed and they are non-
handed, allowing them to be used on both left and right-handed swinging doors.
Both the closer and the plastic slide plate are surface-mounted, and are easy
to install. These closers operate in a pushing-closed manner, rather than in a
pulling-closed method, and they do not have a hold open feature. Distance of
travel: The closer arm of this safety spring closer has the ability to swing a
full 180 degrees, but once it is mounted in place, the door’s distance of
swing will be reduced to the point of where it makes contact with the bullet-
shaped housing of the closer. For a rust and weather resistant closure,
consider model numbers KC50HD (white) and KC57US (brown) which are suitable
for outdoor/exterior use, designed for use with lightweight gates and screen
doors. All fasteners and installation instructions are included with this
item. Other colors/finishes include: black, brown, chrome plated and satin
chrome plated. Be sure to view the manufacturer’s How-To Installation Video
also linked to this page, in the upper left hand corner. Application of white
lithium grease to internal compressing springs may be desired, but you should
avoid using lubricants like WD-40 which breaks down lubricating grease.

Features:

• EASY DIY PROJECT Thanks to these Prime-Line KC10HD safety spring door closers, your next to-do is quick and easy. Use these door closers to convert hinged doors to self-closing ones.
• INCLUDES (1) Surface mounted spring-loaded door closer, tensioning rod, slide plate and hole plugs to cover adjustment holes in closer body after desired tension has been set.
• INSTALLATION NOTE Make sure the closer and tension arm rest on the same plane, not at an angle due to your molding offset. This spring door closer can generate up to 150 pounds of closing force and can be used on both left and right-handed doors adjustment holes in closer body after desired tension has been set.
• ADJUSTABLE TENSION Easily adjust the tension on this safety spring door closer. These closers also feature adjustable closing speed. DO NOT adjust more than 4 quarter turns of the tension arm, or spring failure can happen.
• PRODUCT MAINTENANCE To alleviate spring noise suggested product to use is wheel bearing grease on spring coils when spring is not under load (no other product suggested)
• NOTE – This product is rated for 150 pounds of closing force, (weight of door + wind force trying to keep door open) two may be needed to close if you live in a windy area and have a heavy door

Product Details:

• Material: Diecast
• Brand: PRIME-LINE
• Color: White
• Exterior Finish: White
• Product Dimensions: 9.25"L x 1.5"W x 6.5"H
• Manufacturer: ‎Prime-Line Products
• Part Number: ‎KC10HD
• Item Weight: ‎13.9 ounces
• Product Dimensions: ‎1.5 x 9.25 x 6.5 inches
• Country of Origin: ‎China
• Item model number: ‎KC10HD
• Is Discontinued By Manufacturer: ‎No
• Size: ‎4-1/4 in.
• Color: ‎White
• Finish: ‎White
• Material: ‎Diecast
• Installation Method: ‎Screw-In
• Item Package Quantity: ‎1
• Measurement System: ‎inch
• Mounting Type: ‎Surface
• Special Features: ‎Adjustable
• Included Components: ‎Door closer and fasteners
• Batteries Included?: ‎No
• Batteries Required?: ‎No
• Warranty Description: ‎Goods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.
• Date First Available: March 23, 2010