Plastics 2000 KYDEX V Sheet – .060" Thick, Black, 12" x 12" Nominal, 8PACK
Description
KYDEX V KYDEX V sheet has excellent forming properties, which results in
uniform wall thicknesses and crisp detail. KYDEX V sheet forms to deep draws
with low forces when heated to the upper end of the forming temperature range.
Unlike many other thermoforming sheets, KYDEX V sheet has unusually high
resistance to hot tearing. Forming Guidelines – Oven temperatures should be
set differently than the settings used for ABS or FR-ABS. – Typical heater
settings (percentage timers) are 30% – 50% top heaters and 50% – 70% bottom
heaters. – The most frequent problem is trying to heat the sheet too quickly,
particularly on the primary surface. – Cycle times will vary depending on the
oven conditions and grade of KYDEX V sheet being formed. – When forming KYDEX
V sheet, it is better to rely on the sheet appearance during heating than on
fixed cycle times. – Forming temperatures – Guidelines: (Sheet should not
exceed 204°C (400°F). 165 – 177°C (330 – 350°F) for 3.20mm (0.125″) – Ideally the core sheet temperature should be
within 10°F of the surface temperature. Sheet Appearance During Heating As
KYDEX V sheet is heated, the inherent stresses in the sheet will relax. Stage
I: The heating is marked by wide undulations and softening. Stage II: The
material will start to form small ripples (known as oil canning). . Stage III:
The material will start to smooth out and sag (KYDEX V sheet will generally
sag less than other thermoplastics due to its high melt strength. . Stage IV:
The ripples will have smoothed out indicating that most stresses have been
removed. 10 to 30 seconds afterwards the sheet is ready to form.
Features:
- Kydex V is a recycled grade of Kydex 100 and Kydex T
- Higher breakage resistance than competitive thermoplastics as measured by the Notched Izod test
- Among the most rigid of thermoforming materials with a modulus of elasticity of 2,482 MPa (360,000 psi)
- Easy to form with excellent part definition and deep-draw characteristics
- Great for knife sheaths and gun holsters
Product Details:
- Material: Plastic
- Brand: Small Parts
- Item Dimensions LxWxH: 12 x 12 x 1 inches
- Color: Black, 52114, P3 Velour Matte
- Shape: Sheet
- Is Discontinued By Manufacturer : No
- Product Dimensions : 12 x 12 x 1 inches; 2.75 Pounds
- Item model number : 800011
- Date First Available : June 1, 2010
- Manufacturer : Total Plastics
- Best Sellers Rank: #40,782 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #247 in Plastic Sheets
- #247 in Plastic Sheets
- Customer Reviews: 4.7 4.7 out of 5 stars 1,109 ratings
| Dimensions | 12.0 × 11.8 × 0.5 in |
|---|---|
| Mpn | 800011 |
| Ean | Does not apply |
| Upc | Does not apply |
| Brand | Small Parts |
| Number Of Items | 8 |
| Item Width String | 12 inches |
| Item Length String | 12 Inches |
| Item Thickness String | 0.060 Inches |
- Canada shipment can take up to 10 days
- Alaska, Hawaii, and Puerto Rico shipment can take up to 10 days, and some items may not be permitted to ship to these locations.
- If any shipment is not permitted to your area, full refund will be issued within two business days.
- Refund given as money back (no exchanges)
- Return Shipping to be paid by buyer, unless item defective or damaged.
- 15% Restocking fee applies unless return due to defective or damaged product.
- Perishable or Hazardous Goods are not returnable. Returns may require compliance with Manufacturer policies.
Related products
