WARN 26502 M8000 Series Electric 12V Winch with Steel Cable Wire Rope: 5/16" Diameter x 100' Length, 4 Ton (8,000 lb) Pulling Capacity

Description

The M8000 winch has been trusted by off-roaders for over
twenty years. This 8,000 lb. capacity winch offers outstanding reliability and
value. Its low-profile design allows for a variety of mounting options, making
it perfect for most trucks, Jeeps and SUVs. It is a compact, efficient and
robust package that has a powerful 4.8 horsepower Series Wound motor and
3-stage planetary gear train. This winch includes 100-feet wire rope with a
roller fairlead. Chip-resistant powder-coated finish. Limited lifetime
warranty. From the Manufacturer Compact. Tough. An outstanding value.
Available with a roller or hawse fairlead and your choice of 80 or 100′ of
5/16″ diameter wire rope, the M8000 pulls a fast 8ft. per minute at rated
load. The 4.8 hp Series Wound motor delivers big torque and power. Includes an
all-weather remote control on a 12′ (3.7m) lead. SPECIFICATIONSRated Line
Pull: 8000 lbs. (3630 kgs.) single-line Motor: 12V 4.8 hp, 24V 2.1 hp, Series
WoundTM Remote Control: Remote switch, 12′ (3.7m) lead Geartrain: 3-Stage
Planetary Gear Ratio: 216:1 Lubrication: Aeroshell 17 Clutch (freespooling):
Sliding Ring Gear Brake: Automatic Direct Drive Cone Drum Diameter/Length:
2.5″/9.0″ (6.4cm/23cm) Weight: 74 lbs. (34 kgs.) Wire Rope: 80′, 5/16″ diam.
(24m, 8mm diam.) or 100′, 5/16″ diam. (30m, 8mm diam.) Fairlead for PN 20910:
Hawse Fairlead for PN 26502, 265022, 265032: Roller Recommended Battery: 650
CCA minimum for winching Battery Leads: 2 gauge, 72″ (1.83m) Finish: Argent
Gray Powder Coat Nuts/Bolts: PN 39625 Winch Dimensions: 21.04″ L. x 6.3″ D. x
7.6″ H. (534mm L. x 160m D. x 193mm H.) Mounting Bolt Pattern: 10.0″ x 4.5″
(254mm x 114.3mm)

Features:

• low-profile design and separate control box allows for a wide range of mounting options
• powers load in and out via 100 ft of 5/16 in wire rope;electrical controls: contactor
• efficient, 3-stage planetary gear box and automatic direct drive cone brake system
• powerful 4.8 hp series wound motor, with a 8,000 lb pull rating and sliding ring gear freespooling clutch
• electrical control box and hand-held remote with 12 ft (3.7m) lead
• Fit type: Vehicle Specific. Max Amp Draw-435 Amp Draw

Product Details:

• Manufacturer: ‎Warn
• Brand: ‎WARN
• Model: ‎WARN 26502 M8000 Series Electric 12V Winch with Steel Cable Wire Rope: 5/16" Diameter x 100' Length, 4 Ton (8,000 lb) Pulling Capacity
• Item Weight: ‎83 pounds
• Product Dimensions: ‎26 x 18 x 8 inches
• Country of Origin: ‎USA
• Item model number: ‎26502
• Is Discontinued By Manufacturer: ‎No
• Manufacturer Part Number: ‎26502
• OEM Part Number: ‎26502
• Voltage: ‎12 Volts
• Date First Available: September 1, 2004